Plastics Pipe Institute Releases New Model Specification Document

The Plastics Pipe Institute Inc. (PPI) has released a new model specification document that provides guidance to specifiers, engineers, designers, and others about selecting, specifying, and installing plastic piping materials for ground source geothermal systems.

Prepared by PPI’s Building & Construction Division, PPI MS-7 Model Specification for Plastic Piping Materials for Ground Source Geothermal Applications applies to plastic piping materials for open- and closed-loop, horizontal and vertical, direct-buried, and submerged water-based ground-source geothermal heat exchange systems.

PPI MS-7 includes detailed specifications for four plastic piping materials which have been proven in ground source heat exchange systems: HDPE, PE-RT, PEX, and PP (PP-R and PP-RCT).

According to PPI, the definitions, terms, and other information can be readily used in bid documents. The model specification provides language related to pipe and tubing materials, fittings, and joining procedures. Installation and pressure testing recommendations are also provided. It complements another PPI document, PPI TN-55 Plastic Piping Materials for Ground Source Geothermal Heating and Cooling Applications.

“High-density polyethylene (HDPE) has been the primary piping material used in geothermal ground loops for decades and is a proven resource for this application. The product standards and specifications for HDPE piping, however, have evolved in recent years, so a specifier who uses outdated language for piping systems may inadvertently specify a product that no longer exists in the market, or one that is simply less capable than the current state of the art,” explains Lance MacNevin, P. Eng., director of engineering for PPI’s Building & Construction Division.

“Also, two other types of HDPE-based piping materials, PEX and PE-RT, are now approved in model codes for geo ground loop and are important options for certain projects. In addition, PP-R and PP-RCT piping systems are recommended for indoor piping.”

The team of experts from PPI member companies that developed MS-7 consulted with the latest model codes and standards from ASTM, CSA, IAPMO, ICC, IGSHPA, and NSF when developing the content. The new model spec also includes an entire section on indoor piping products that are typically installed in mechanical rooms to connect the outdoor ground loops with heat pumps and hydronic distribution systems.

Click here to access the model specification document.

Additional information and data about piping materials used for both outdoor ground loop and indoor mechanical room piping materials is available from the PPI Building & Construction Division at